DUCATI

2020 Ducati Hypermotard 950 SP Rumors

2020 Ducati Hypermotard 950 SP Rumors

2020 Ducati Hypermotard 950 SP Rumors – Along with the new Panigale V4 R, Ducati also announced the new 950 HyperMotard, which will be available both in standard and over 950 specifications SP Edition. Both are still running the 937cc Ducati testast Frita twin engine, although the grinder is a little more than 3 pounds lighter by some of the updated components. These new pistons include new features, exhaust cam, lighter clutch and generator covers, lighter gear shift drum, aluminum tensioner chain, and magnesium cam covers.

Ducati cites the new pistons and the highest 13.3: 1 compression ratio (up from 12.6: 1 on the previous version) and contributes to the improvement of 4 HP, bringing a total of 114 hp at 9,000 rpm. There will be 71 lb-ft of torque available at 7,250 rpm, but Ducati points out that the large towing power is available throughout the Range Rev., with 80 percent of total torque taking advantage of 3,000 rpm and up to 88 percent Available between 5,000 and 9,000 rpm. A new European cash unit and a riding system through wires contribute to improved power delivery as well.

2020 Ducati Hypermotard 950 SP Rumors

2020 Ducati Hypermotard 950 SP Rumors
2020 Ducati Hypermotard 950 SP Rumors

2020 Ducati Hypermotard 950 SP Specs

The heart of the new HyperMotard 950 is a revised 937cc Testast VERTA 11-degree twin with a powerful towing and new electronics to ensure smooth control. With 114 hp in 9000 RPM torque and 9.8 kg – of which 80% is available at 3,000 RPM. The 950s get a very refined steel frame frame, with more tapered tubes for a further 2.2 pounds drop in weight. The sub-frame steel tube grating and unilateral aluminum swingarm round outside the skeleton components of 950 and 950 Syrian pounds.

When we get to the comment, the differences between the two models become more pronounced. The base Hypermarket 950 sporting 45m Markoshi forked with aluminum forked body and tubes (for another 1-pound weight savings) and Sachs bumped him back. The front travel is 6.7 inches and the rear travel is 6 inches. The Hypermotard 950 SP has high specification components, with 48mm öhlins shock and öhlins shock, both providing more travel from the base, 7.3 inches in front and 6.9 inches in the rear.

Improved performance stems from the new pistons with a 13.3: 1 compression ratio (compared to 12.6: 1 on the previous version), and features a new exhaust cam and a new exhaust system with a sound damper under the seat. Braking is handled by the Brembo M 4.32 four-piston radial mono caliper mass in the front, biting 32mm dual disks. The rear setup is a single piston Brembo Caliper and a 245mm disc. This setup features both 950 and 950 SP.

2020 Ducati Hypermotard 950 SP Rumors

The new 53 mm throttle bodies feed fuel for the FRETA testast 11 ° while the new unit controls the engine and steams throttle steering by helping it manage its power delivery Both the HyperMotard 950 and the SP version also benefit from the new, lighter clutch and generator covers, lighter gear shift drum, and aluminum (instead of steel) chain tensioner and magnesium cam covers.

Ali 950, three-spoke aluminum alloy wheels with three tires Pirellis Diablo Rosso while Ali 950 Syrian Surge Knights get the forged Y-spoke wheels mounted with the Diablo Supercorsa SP tires. Other basic differences that have developed the SP 950 apart are the Ducati Quick Shift (can be added to the base as an accessory upgrade), a flat seat, carbon fiber elements such as the front windshield covers and a longer seat height (35 inches compared with 34.2 inches on the base ), Three degrees more lean angle, generally lighter. According to Ducati 950 Syrian pounds tables at 436.5 pounds ready to ride and 950 base weighs 441 pounds.

2020 Ducati Hypermotard 950 SP Engine

Now the self-servo clutch wet slipper can be operated with a lower voltage lever thanks to the new hydraulic control system. The 937 cc Ducati cylinder engine also has long maintenance periods: oil changes are required every 15,000 km while there is a need for a DESMO service every 30,000 km.

The revised ride position increases control, thanks to the wider steering wheel, the slimmer sides and the new seat that immobilizes the ride while riding and ensures it can be firmly placed on the ground thanks to a curved inner leg measurement that is now 53 mm shorter, with a 870 mm height seat on the standard version .

The seat on his new 950 hp is spacious and long with a slightly elevated passenger area for its great comfort. On the SP version, instead, the flattening is more of a mockard style to ensure longitudinal motion even better during horseback riding. Again with the eye to maximize control, the handlebar tips are opened by a 7-degree.

2020 Ducati Hypermotard 950 SP Review

2020 Ducati Hypermotard 950 SP Review
2020 Ducati Hypermotard 950 SP Review

2020 Ducati Hypermotard 950 Performances

Ducati worked down the middle section of the seat on each of the machines, tapering the rear subframe and pinching the main frame attachment. As mentioned above, 950 Syrian pounds has a flat seat in keeping the Mockard style while the standard 950 gets a new seat with a slight height to accommodate more comfortable passengers. The steering wheel has been widened too little to improve rider control. Both brake and clutch levers are adjustable and can remove pegs of passengers easily. There is also a USB port under the seat.

The new frame steel grille with tapered tubing, reduces the weight by one kilogram compared to the previous model. With 25 degrees of raked rake, 104 mm of trail and 30 mm clearance, it is claimed that the control is secure and stable but without compromising the subtle movement of the bike.

All of the advantage of the state-of-the-art electronics, with the general movement of Uzbekistan six axes, the acquisition of ABS EVO that has a sliding by brake function, Ducati Traction Traction Evo, Ducati Driving Control Evo, three ride modes, daytime running light, full front and rear LED indicators . A 4.3 inch TFT display has a similar design used in the Panigale V4 and will provide all the necessary information. If riders choose to fit the Ducati multimedia accessory system, the TFT display also shows things like incoming calls, music playing track, and text message signals.

A generous steering lock of 70 ° helps handle it, while a 1493 mm wheelbase (1498 mm SP version) increases the speed of high stability. A 14.5 l fuel tank gives the HyperMotard 950 a reasonable range. The hypermotard 950 features a one-sided aluminum arm.

2019 Ducati Hypermotard 950 SP

The 2019 Ducati HyperMotard 950 will be available in the Ducati Red with red frame and black wheels while the Syrian Lira will come in a sp color system with a red frame and black rims. Aluminum tapered handlebar mount radial pumps with separate front brakes and fluid clutch tanks (the hydraulic clutch replaces the previous one-run cable); while the design of the front of the TFT color display is taken from the braid plate on the Panigale V4.

Brake and clutch lever leash gaps are adjustable. Pegs of passengers are removable. The seat features a passenger grip belt that can be hidden when not in use. The HyperMotard 950 also has a USB socket under the seat. The 950 new hypermotard mounts, fully adjustable 45 mm Markoche thorns with aluminum alloy / pipe fittings that give the wheel travel of 170mm. This setting is half a kilo lighter than the unit mounted on the previous version.

The front brakes are driven by a pair of Brembo m 4.32 4-piston radial monoblock, driven by a radial brake pump and a 5-position adjustable arm. The front discs have a diameter of 320 mm and aluminum flanges (saving a total of 600 grams), while the rear sport one disc is 245 mm controlled by the Brembo Caliper.

Related Articles

If you want to be happy for a lifetime, ride a motorcycle.


Back to top button